Maintenance checks on hydraulic pulling horses

Maintenance and inspection of hydraulic pulling horse: 1. Before use, tighten the return valve lever in clockwise direction. 2. Adjust the hook and claw seat to the point where the claw hook grasps the object to be pulled. 3.

2023-08-11

How to replace the mold of hydraulic punching machine

Hydraulic punching machine molds how to replace: 1, the operator must be trained in safety techniques, qualified only on the job. 2, the moving parts of the machine, the movement will be beyond the scope of the seat and foot, the machine is open, no one shall not enter the above danger zone.

2023-08-11

Hydraulic punching machine use

Hydraulic punching machine use: 1, the oil pump and the work head with a quick connector connected. 2, select the appropriate upper and lower mold, first installed on the mold after the installation of the lower mold, when installing the upper mold will be screwed out of a certain position and then loaded into the lower mold, be sure to put in place, and then tighten the locating screws can be operated.

2023-08-11

Maintenance and repair of hydraulic tools

Hydraulic engineering machinery in a long period of continuous work, due to the working environment and conditions: temperature, dust, vibration, fatigue injuries, wear and tear, touch damage and other phenomena, equipment maintenance is particularly important. Like a person's body - the same, constantly replenish the nutrition, to maintain life without end, more than fighting.

2023-08-11

Safety regulations for the use of hydraulic tools

Although hydraulic tools are filled with hydraulic fluid, their moving parts should be lubricated regularly.

2023-08-11

Advantages of hydraulic bolt tensioners

Electricity, shipbuilding industry, metallurgy and coal mining, petrochemical industry, heavy machinery and other fields.

2023-08-11

How often should I replace my hydraulic filter element?

Hydraulic system generally in the operation of 2000h after the need to replace the hydraulic oil, otherwise the system will be contaminated, resulting in system failure. According to statistics, about 90% of the failure of the hydraulic system is due to system contamination.

2023-08-11