How to replace the mold of hydraulic punching machine
Release time:
2023-08-11
Hydraulic punching machine molds how to replace: 1, the operator must be trained in safety techniques, qualified only on the job. 2, the moving parts of the machine, the movement will be beyond the scope of the seat and foot, the machine is open, no one shall not enter the above danger zone.
1、Operators must be trained in safety techniques and qualified before they are allowed to work.
2, the moving parts of the machine, the movement will be beyond the scope of the base and foot, when the machine starts, no one shall enter the above danger zone.
3、When the machine is working, the operator's hand can not be placed near the mold and the movement platform. The height of the platform shall not exceed 10 centimeters.
4, the machine is running, not to repair and adjust the mold.
Recommended News
Hydraulic punching machine use
2023-08-11
Maintenance and repair of hydraulic tools
2023-08-11
Info-
Sitemap-
24-hour hotline
Address: Building 29, Chuang Rong Industrial City, Chengbei, Yuhuan City, Taizhou City, Zhejiang Province