I. Hydraulic tools use safety regulations
1, hydraulic tools although full of hydraulic oil, but its moving parts should be lubricated regularly.
2, filling the hydraulic oil, should not be overfilled, bending full of hydraulic oil will produce a vacuum, hydraulic oil will not be able to flow from the container, thus affecting the normal work.
3, if the hydraulic tool elastic phenomenon, should be excluded in time.
4, when the hydraulic lift can not reach the full nominal, should be promptly refilled with the original brand of hydraulic oil, not with brake fluid, gear oil or other oil instead.
5, when the hydraulic lift can not be retracted, it should be timely exhaust, and at the same time check whether the plunger is bent or connector is intact.
6, when the hydraulic cylinder pressure drops, should check whether the drain valve is completely closed or the ball valve whether there is dust, defects.
7, such as normal work - - times, and can not carry out the second _ work, should be cleaned and refilled with hydraulic tools.
8, is strictly prohibited in the case of not fully unloaded, suddenly open the high-pressure cylinder and the oil pipe connector.